|Max power, kW||5.5|
|Nominal power, kW||5.0|
|Current (max), А||23.9|
|Outlets||1 x Schuko 230 V, 1 x CEE 230 V 32 A|
|Fuel tank volume, l||11|
|LED display||Load, fuel level, voltage, frequency, working hours; overload indicator, voltage indicator, oil level indicator.|
|Noise level Lpa (7m)/Lwa, dB||70/95|
|Power output DC, V/А||12V/8.3A|
|Engine model||KS 240i|
|Engine cylinder volume, cm3||3223|
|Engine type||Gasoline powered one-cylinder, four-stroke air-cooled|
|Engine power, hp||7.5|
|Possibility of parallel connection||+|
|Output for ATS||+|
|Crank case volume, L||0.7|
|Gross dimensions (LxWxH), mm||640х425х600|
|Net weight, kg||39.5|
|Gross weight, kg||43.4|
Assembled in PRC.
*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.
The built-in electronic unit with microprocessor control monitors the operation of the generator and provides a stable output voltage of 230V 50Hz sinusoidal form, which is suitable for the reliable operation of sensitive electronics.
The Könner & Söhnen reliable engine is characterized by increased durability, long and stable operation, and meets all European quality standards, including EURO V.
The ergonomic control panel is equipped with a fuel economy mode switch. This mode reduces fuel consumption by up to 50% at small loads due to lower engine revolutions.
|AUTOMATIC TRANSFER SWITCH
The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored. The ATS outlet has an 8-pin connector for connecting the ATS device KS ATS 4/25 gasoline.
6-IN-1 MULTIFUNCTION LED DISPLAY
The 6-in-1 multifunction LED display has the following indicators: load indicator, fuel level indicator, hour meter, voltage, frequency, oil level indicator, overload indicator, working mode indicator.
ERGONOMIC CONTROL PANEL
Convenient location of all functions: working mode indicator, overload and short circuit protection, low oil level sensor, Reset button to reset the control system and restore voltage supply, connector for parallel connection of generators, typical 12 V car socket for a wide range of car devices, gadgets and battery charging, 230 V sockets and grounding terminal.
LOW NOISE LEVEL
Thanks to the special protective case, which ensures a minimum noise level of 70 dB (Lpa 7 m), convenient to use and transport. The product is equipped with a transport system.
HIGH QUALITY ALTERNATOR
TM Könner & Söhnen generators are equipped with a high-end synchronous alternator with 100% copper winding. It is only the copper winding that can withstand maximum loads without any damage to ensure long-term reliable operation of the generator set.
KS PU1 generator parallel unit from Könner & Söhnen® allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained. It is suitable for all Könner & Söhnen® inverter generators which are parallel ready: KS 2000i S, KS 2000iG S, KS 4000iE S, KS 4000iEG S, KS 4100iEG, KS 6000iE S
Könner & Söhnen Inverter generators are equipped with a transport system for easy movement. Two wheels and a handle that lifts when the generator is moved ensure comfortable transportation and mobility.