Kirjeldus

Definitions of rated power – Standby mode: Intended for providing emergency power during a power cut. Overload protection is not available for this rated power.
(All rated values comply with standards BS5514, ISO3046 and DIN6271).
Maximum kilovolt-amperes and current depend on, and are limited by, factors such as the fuel’s Btu/megajoule content, ambient air temperature, altitude above sea level, engine power and condition, etc. Maximum power decreases by approximately 3.5 per cent for every 305 metres above sea level; and also by approximately 1 per cent for every 6 °C above 16 °C.

Note: The fuel line must be of a size suitable for full load. The required fuel pressure at the generator’s fuel inlet is 0.87–1.74 kPA (3.5–7 inches of water column) for natural gas and 2.49–2.99 kPA (10–12 inches of water column) for liquefied petroleum gas.
Output ratings are based on values of 1,000 Btu per cubic foot for natural gas and 2,500 Btu per cubic foot for liquefied petroleum gas.
37.26 megajoules per cubic metre for natural gas and 93.15 megajoules per cubic metre for liquefied petroleum gas.

Generator specifications
Frequency	Hz	50
Voltage regulation system		AVR
Phases		3
Poles		2
Current data
Maximum current (LPG)	A	28.87
Maximum current (Natural gas)	A	24.54
Circuit breaker	A	32
Dimensions
Length	(L) mm	1232
Width	(W) mm	648
Height	(H) mm	733
Dry weight	kg	220
Noise level
Guaranteed noise level (LWA)	dB(A)	95
Sound pressure level	dB(A)	67
Silent test mode	dB(A)	59

Features and benefits

Engine
Generac G-Force design: maximises the engine’s „breathing“ to improve fuel economy. The stepped cylinder walls and plasma-molybdenum rings help the engine run cooler, reducing oil consumption and extending the engine’s service life.
“Cast iron cylinder walls with ”ogakinnitus”: A rigid design and greater durability ensure a long service life for the engine.
Electronic ignition/spark delivery: these features ensure a smooth and quick start every time.
Full-pressure lubrication system: Pressurised lubrication of all critical bearings means better performance, less maintenance and a longer engine life. Now with an oil change interval of up to 2 years or 200 hours.
Low-oil-pressure shut-off system: the shut-off protection prevents catastrophic engine damage caused by low oil levels.
High-temperature cut-out: prevents damage caused by overheating.

Generator
Rotating field: enables the creation of a smaller and lighter device that operates 25% more efficiently than a generator with a rotating armature.
Skewed stator: Produces a smooth output waveform that is compatible with electronic devices.
Phase-shifted ignition: maximises the engine’s starting performance.
Automatic voltage regulation: regulates the output voltage with an accuracy of ±1%, preventing harmful voltage spikes.
True Power technology: less than 5% total harmonic distortion (THD).

Evolution™ control buttons
Automatic/Manual/Off illuminated buttons: Selects the operating mode and provides a simple and quick overview of the device’s status in any situation.
Recessed, raised buttons: a smooth and weatherproof user interface for programming and operation.
Mains voltage detection: continuously monitors the mains voltage; set points are 65% for a drop and 80% for a rise from the standard voltage.
Power supply interruption delay: prevents the motor from starting unintentionally; an authorised dealer can adjust this from the factory default of 5 seconds to between 2 and 1,500 seconds.
Motor warm-up: Ensures that the motor is ready to accept a load; the set time is approximately 5 seconds.
Engine cooling: allows the engine to cool down before being switched off; the default setting is approximately 1 minute.
Programmable seven-day maintenance cycle: Starts the engine to prevent the oil seal from drying out and becoming damaged between power cuts, by running the generator for 5 minutes every two weeks. It also offers an optional setting for weekly or monthly operation, providing the owner with flexibility and potentially lower fuel costs.
Smart battery charger: Charges the battery only when necessary, at varying speeds depending on the ambient temperature. Compatible with lead-acid and AGM batteries.
Main circuit breaker: Protects the generator against overload.
Electronic regulator: maintains a constant frequency of 50 Hz.
Wi-Fi connectivity

Generator set
Weatherproof aluminium body: Sound-insulated bodies ensure quiet operation and protection against the elements, withstanding winds of up to 240 km/h. For added security, the roof panel is hinged and lockable with a key. A lift-up front section for easy access to all routine maintenance tools. Electrostatically applied textured epoxy paint for added durability.
Sealed silencer: a quiet, critical-class silencer is fitted inside the unit to prevent injury.
Small, compact, attractive: a simple and visually pleasing installation.

Installation system
305 mm flexible fuel hose connection: Absorbs the generator’s vibrations when connected to a rigid pipe.
A composite mounting plate installed directly onto the ground: its intricate lattice structure prevents the generator system from sinking or subsiding.
Integrated sediment trap: prevents particles and moisture from entering the fuel regulator and the engine, thereby extending the engine’s service life.

Control buttons
Evolution™ digital controller
Precise control of all generator systems ensures clean and stable electricity generation. A backlit LCD screen with automatic contrast adjustment for easy viewing in changing conditions.

Mode buttons:

• Automatic/Manual/Off

Programme features and safeguards:

• Ready for work/maintenance notices
• Engine operating hours indicator
• Programmable start-up delay
• Voltage drop/reverse voltage adjustable
• Error message for a Future Set-compatible trainer/training set
• Start-up, fault and maintenance logs (50 events each)
• Engine start-up sequence (cyclical start-up: 16 seconds on, 7 seconds off, up to a maximum of 90 seconds).
• Smart battery charger
• Charger fault/no AC power warning
• Battery drain/battery fault protection and battery status indicator
• Automatic voltage regulation with overvoltage and undervoltage protection
• Under-frequency/overload/step overload protection
• Protection against security issues
• Automatic shut-off in the event of low oil pressure or high oil temperature
• Over-revving/overspeed (@ 72 Hz)/shutdown in the event of a loss of rpm signal
• Shutdown due to high engine temperature
• Internal fault/incorrect wiring protection
• Joint external failure capability
• Firmware that can be updated over the air
• Wi-Fi MOBILE LINK™
• Circuit breaker

AUTOMATIC BACK-UP GENERATORS

• Compatible with LTS load switches (optional accessory)

LTS – load transfer switch(accessory)

The load transfer switch (LTS) panel controls the switching of the power source between the generator and the mains in backup power applications, ensuring that the load remains powered for a short period.
It consists of a separate cabinet which can be installed independently of the generator. The logic control for the power source switchover is managed via an automatic control panel fitted to the generator; therefore, no logic devices are required on the LTS panel.

Range of accessories
Oil heater (directly above the oil filter)
Battery pad heating (under the battery)
Fascia base cover set
Maintenance kit
Transport trolley for an air-cooled generator
Extended warranty: 5+5 years