Inverter generator KS 6000iE S

Free delivery within Estonia!

TARNEAEG September 15, 2026

1279.00 

* Includes VAT 24%

Voltage, V 230
Max power, kW 5.5
Nominal power, kW 5.0
Frequency, Hz 50
Current (max), А 23.9
Outlets 1 x Schuko 230 V, 1 x CEE 230 V 32 A
Engine start Manual/electric
Fuel tank volume, l 11
LED display Load, fuel level, voltage, frequency, working hours; overload indicator, voltage indicator, oil level indicator.
Noise level Lpa (7m)/Lwa, dB 70/95
Power output DC, V/А 12V/8.3A
USB-Outputs 5V/1A, 5V/2.1A
Engine model KS 240i
Engine cylinder volume, cm3 3223
Engine type Gasoline powered one-cylinder, four-stroke air-cooled
Engine power, hp 7.5
Possibility of parallel connection +
Output for ATS +
Crank case volume, L 0.7
Alternator winding Copper
Protection class IP23M
Gross dimensions (LxWxH), mm 640х425х600
Net weight, kg 39.5
Gross weight, kg 43.4
EAN code 4260405365791

Assembled in PRC.

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.

Kirjeldus

 

PURE SINE WAVE

The built-in electronic unit with microprocessor control monitors the operation of the generator and provides a stable output voltage of 230V 50Hz sinusoidal form, which is suitable for the reliable operation of sensitive electronics.

ROBUST ENGINE

The Könner & Söhnen reliable engine is characterized by increased durability, long and stable operation, and meets all European quality standards, including EURO V.

ECONOMY MODE

The ergonomic control panel is equipped with a fuel economy mode switch. This mode reduces fuel consumption by up to 50% at small loads due to lower engine revolutions.

AUTOMATIC TRANSFER SWITCH

The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored. The ATS outlet has an 8-pin connector for connecting the ATS device KS ATS 4/25 gasoline.

6-IN-1 MULTIFUNCTION LED DISPLAY

The 6-in-1 multifunction LED display has the following indicators: load indicator, fuel level indicator, hour meter, voltage, frequency, oil level indicator, overload indicator, working mode indicator.

ERGONOMIC CONTROL PANEL

Convenient location of all functions: working mode indicator, overload and short circuit protection, low oil level sensor, Reset button to reset the control system and restore voltage supply, connector for parallel connection of generators, typical 12 V car socket for a wide range of car devices, gadgets and battery charging, 230 V sockets and grounding terminal.

LOW NOISE LEVEL

Thanks to the special protective case, which ensures a minimum noise level of 70 dB (Lpa 7 m), convenient to use and transport. The product is equipped with a transport system.

HIGH QUALITY ALTERNATOR

TM Könner & Söhnen generators are equipped with a high-end synchronous alternator with 100% copper winding. It is only the copper winding that can withstand maximum loads without any damage to ensure long-term reliable operation of the generator set.

PARALLEL CONNECTION

KS PU1 generator parallel unit from Könner & Söhnen® allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained. It is suitable for all Könner & Söhnen® inverter generators which are parallel ready: KS 2000i S, KS 2000iG S, KS 4000iE S, KS 4000iEG S, KS 4100iEG, KS 6000iE S

TRANSPORT KIT

Könner & Söhnen Inverter generators are equipped with a transport system for easy movement. Two wheels and a handle that lifts when the generator is moved ensure comfortable transportation and mobility.

Additional information

Weight 43.4 kg
Dimensions 64 × 42.5 × 60 cm
Fuel type

kW requirement

Start-up

Electric, Manual

Why choose us?

Maintenance and warranty repairs

Generators require regular maintenance based on their operating hours to ensure their reliability and a long service life. When you buy a generator from Genekas24, you not only get a high-quality product but also professional maintenance and warranty services.

We carry out both routine maintenance and warranty repairs. If necessary, one of our mechanics will visit the machine’s location, or you can bring the equipment to our service centre in Pärnu.

Official representative – professional advice

Genekas24 is Könner & Söhnen, FOGO, ITC Power and Pramac Official representative in the Baltic States and Finland. Thanks to our direct collaboration with manufacturers, we provide reliable product information and professional advice, and help you find a solution tailored to your specific needs.

Get in touch with us:

📞 +372 5560 3100 (Estonian, English)
📞 +372 5043 811 (Estonian, English)
📞 +372 5539 022 (Finnish, Russian, Estonian)

✉️ info@genekas24.ee

Genekas24-reklaami-templaadid(2)
Maintenance and warranty repairs of generators
233a Riia Road, Pärnu, 80042 Pärnu County
Mon–Fri 10.00–17.00
View the price list

Send a product request